Fingerprint Lock Motor introduction:
Basic security work, lock body responsible for the security door lock body responsible for opening and closing lock, the lock body Lock Motor is of crucial importance.
Functions: it is widely used in various intelligent locks, such as Shared bicycle lock, fingerprint lock, glass lock, safe lock, hotel lock, family lock, inductive smart lock, etc
Features:Fingerprint Lock Motoris based on micro precision reducer development, small intelligent micro precision reducer can do 10 mm in diameter, is widely used in safe, locks, smart locks, sensor intelligent lock;
This kind of motor has the characteristics of low noise, low energy consumption, small volume, light quality, high precision, large torque and durability
Method of use: the best stable in horizontal plane, installed on the Fingerprint Lock Motoroutput shaft parts, cannot use a hammer to knock, knock prone to press into the dc Fingerprint Lock Motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
Operating temperature range:
lock motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a lock motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
Fingerprint Lock Motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you
Looking forward to your inquiry. Welcome to our factory.
Fingerprint Lock Motor Fingerprint Lock Motor,Motor For Fingerprint Lock,Gear Motor For Fingerprint Lock,Dc Motor For Fingerprint Lock Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com
Almost 95% of ATM devices still run the Windows XP operating system. With the arrival of the date on April 8, 2014, when Microsoft announced that it will stop providing technical support for Windows XP, the banking industry will face more ATM networks. Malicious threats.
At the end of 2013, the Symantec Security Bulletin had analyzed new ATM malware named Backdoor.Ploutus from Mexico. Through this software, an attacker can use an external keyboard to randomly withdraw cash from ATMs. A few weeks later, Symantec discovered a new version of the software - it has been upgraded to a modular architecture, Backdoor.Ploutus.B (Ploutus), and can attack ATMs via SMS.
Overview of the attack process:
1. The attacker installed Ploutus on the ATM and connected the mobile phone via the USB cable
2. Send two SMS messages to the ATM built-in mobile phone via the controller
a. SMS 1 contains a valid activation ID, which starts Ploutus within the ATM
b. SMS 2 contains a valid allocation order to withdraw cash
3. Mobile phones forward valid SMS to ATM in the form of TCP or UDP packets
4. The ATM internal network packet monitoring module accepts TCP/UDP packets. If it contains a valid command, it can start Ploutus.
5.Ploutus triggers ATM to spit cash, the amount of cash is preset in the malware
6. Criminals withdraw cash from ATM
In addition to Ploutus, Symantec also discovered multiple malicious software that attacked ATM machines. An attacker may use Ploutus to steal cash from ATMs, and may also try to steal user's bank card information and passwords through other malicious software, and some malware may also take a middleman attack. All in all, there are many ways to attack malicious attacks on ATMs, and it needs to attract the public's attention.
How to protect ATM equipment from infringement?
Although the security features of modern ATM machines have actually been strengthened, there are still great security challenges for older Windows XP system ATMs. At the same time, the physical security of the internal computer of the ATM is another problem that needs to be solved urgently, because although the ATM machine securely keeps the cash in the safe, the computer does not.
In response to this situation, Symantec recommends that banks and other financial institutions adopt the following best security practices:
• Upgrade operating system to Windows 7 or Windows 8
• Provides adequate physical protection and installation monitoring
• Lock the BIOS to prevent boot from unauthorized media such as CD ROM or U disk
• Use full disk encryption to prevent hard disk tampering
• Use system locking solutions such as Symantec Critical System Protection
With these measures, attackers can hardly attack ATMs. In addition, Symantec has announced that existing user, terminal and server security solutions will continue to support Windows XP systems in the short term, and Symantec strongly recommends that users still using Windows XP upgrade to newer ones as soon as possible. version of.