Because I was busy busy with children in 2016, I was not worth buying for a long time. I recently tossed the Pony V1 again.
It was once envisaged that a manufacturer could produce a NAS, which could combine data storage, video playback, and route switching. However, no related products have been found. Recently, because the company purchased a QNAP TS-451 from QNAP, studied QNAP's system, suddenly found that the system actually can run on the V1, and can run VM running OP route (tested Found that can run full Gigabit, CPU occupied 30%, very NB), and then actually can video output, part-time HD playback, is really satisfied N wishes.
Before explaining the installation of QNAP system, it should not be a Blackwell system. . . . . . First of all, we must first express our thanks to Unicom and then odie82544 for releasing the modified system.
With regard to some issues of the Black Alliance system, the copyright O is below, I am just a porter, the original is in the next network, I am only slightly modified
1. Can OOXX motherboard be installed? => No
02. High power consumption? => Very high
03. unstable? => unstable
04.QTS APP Usage => Please ask QNAP Customer Service
05.OOXX expansion card, can the array card support => No
06. Is it possible to add support for OOXX NICs, expansion cards, array cards, etc. => There is no plan to do this in the short term
07. System sleep seems to be a problem => Yes, very likely
08. The system serial number and Qcloud function cannot be used => Yes, because this is a black machine
09. Is there a new firmware update that supports the official website release? => No
Hardware support range:
A. Intel x64 CPU
B. Based on Intel ICH9, PCH's AHCI SATA Port, this edition currently supports up to six hard drives!
The tested boards are: Z77, Z87, B85, ATOM D2700, Pony V1 (N3700 4 network card), Pony V2 (N3700 3 Intel network card), Pony V3 (said to have been discontinued), Pony V5 (Latest products, 3 NAS)
C. Supported Network Cards: Intel 8254x (e1000), Intel 8257x (e1000e), Intel i210/i217/i350 (igb) Intel X540, Realtek PCIe 8111 Similar Series (r8168) 9 AX88179 USB 3.0 Similar Series
D. The VM is not supported temporarily
E. HDMI out Please DIY
F. It is recommended to use AMI BIOS motherboard.
G. It is currently found that some installation methods use empty hard disks to install if there is data failure in the hard disk.
Pre-installation preparation, software: Qfinder (installed software running under Win), Blackwell system mirroring, mirroring software rufus, etc., related software is shared here: Link: http://pan.baidu.com/s /1sk9TLfB Password: 9ue5
Hardware: U disk one, my own pony V1, friends tested the pony V2, V5 can also be installed. MSata or SATA SSD, a minimum of 32G, temporarily testing 16G installation can not start. 
Let's look at the installation process. First use rufus software to write the black mirror to the U disk (more than 512MB can), then bios set U disk to start the pony V1, on the black Granville start very slow about 5 minutes, you can see a news to see The video is back again, and the network cable is inserted into the Colts V1 (the hardware configuration is the INTEL N3700, one SATA port and one MSATA port, four Gigabit Ethernet ports, and two USB ports) under the same route. The computer is installed Qfinder, open, normal case you will see below.
If it is not normal you will see below
This situation shows that Blackwell's firmware does not recognize your hard disk, indicating that the firmware is not suitable for your hardware, you need to replace the firmware! ! !
You can right click on Qfinder and click on detailed information to view the hardware identification status, including hard disk and network card. The figure below shows all hard disk identification.
Here to talk about the installation, the recommended firmware installed in the MSATA or solid state hard drive, this faster to run the program, and even if the system disk is damaged does not affect the data disk, remember at least 32G solid state drive, anyway, I installed in the 16G solid state unsuccessful . The data disk can be installed after the correct installation of Blackwell, and then formatted to add.
General choice family
Enter the password, remember the password at least six, you enter a five-digit password will not prompt an error, but after the installation, you decide to log in! ! This is the lesson of blood! !
Personally like to choose casually! !
Look at personal needs, you can specify or DHCP distribution, see you personally, anyway, this installation can also be set.
It's time to share all your choices!
32G SSDs can only select a single disk partition! !
After the installation is completed, log in
Click restart in the upper right corner to restart it will be more normal! ! ! After restarting, it will take about 2 minutes before restarting. It is estimated that the problem is Blackwell's firmware. No way is black, free is the most expensive! Then wait another 5 minutes! ! ! Again, Weitongtong started slowly! ! ! The most important thing to remember is not to pull U disk, be sure to boot U disk! ! Do not pull the U disk, unless you do not restart, boot fully rely on U disk! ! The genuine QNAP hardware is configured with a 512MB DOM disk as the installation boot disk, so you need a USB disk that you can eliminate.
After restarting, the photo wall on the login screen is out, GOOD!
Into the pop-up prompt blank window, select NO on the right, and then restart again!
After restart, click on the upper right corner, select the language, select Traditional Chinese, and it looks like the English is not too normal.
A key step, click on the console, application services, web server, the correct installation should be as shown in the figure below, otherwise you are unsuccessful to install, can not easily use a variety of elegant and convenient NAS services.
Install a hybrid desktop workstation, HDMI video can be output after installation, part-time high-definition player or a computer, you can go online, play mini-games.
By the way, remember to close the update! ! ! Do not update black, update will not start up! ! !
Open APPCenter, install the required APP, such as VideaStaion, recommend to install the virtual machine program, used to run Openwrt, windows and other systems.
To be continued unfinished, the virtual machine and high-definition player are added from time to time. Interested in exchanges can add their own Q group Pony soft routing, irregular online.
With regard to more QNAP gameplay, it is worth buying and searching for China Unicom, and it is a lot of detailed gameplay.
RF Connector Adapter
RF Connector Adapter,RF Adapters SMB To SMC,RF Adapters N To BNC,Plug To Plug Adapter Connectgor
Xi'an KNT Scien-tech Co., Ltd , https://www.honorconnector.com