Lingxing Rain 8th Generation LED Display Control System Products

First, the Lingxing Yu eight generation system can control the range

1, the main control card

801 type 1024X768 or 1280X1024; 802 type 1600X800, 2048X640, dual card cascading maximum support 2048X1152 or 1920X1200

Single network cable support: 801 card 1024X640, 1280X512; 802 card 1600X400, 2048X320

2, the receiving card: depending on the control width, the number of scanning bits (gray level), refresh frequency, generally outdoor 192X64, indoor 256X128

3, transmission mode network cable 140 ~ 170 meters, multimode fiber 500 meters, single mode fiber 10 ~ 20KM. Single mode fiber: The center glass core is very thin (the core diameter is generally 9 or 10 μm) and can only transmit one mode of light. Therefore, its inter-mode dispersion is small and suitable for remote communication. Multimode fiber: Allows different modes of light to be transmitted over a single fiber for short-range communication.

Second, the new features of the spirit star rain eight generation system

1, ultra high refresh rate, high gray

A new optional refresh rate mode is added. The ultra-high refresh mode is 8-128 times the standard mode (the refresh rate that the customer can reach), and can be 65536 gray levels.

2, enhance software correction function

The single-receiving card point-by-point correction is upgraded from the original 96X64 to 320X256, and the correction range is increased by more than ten times, which greatly reduces the use of the receiving card and shortens the overall correction time.

3, increase support for dedicated chips

Full support for dedicated chips MBI5030, MBI5042, DM13H, TC62D722, other dedicated chips will be added gradually.

4, receiving card off output function

The two 50P cables on the left and right sides of the receiving card are respectively output, and a larger refresh rate and a higher gray scale can be realized.

5, the receiving card can set different data starting point

Each port of the adapter board can be set with an independent loading start point to support the special shaped screen and special settings.

6, the transmission card added vertical split loading mode

The output of the sending card network port supports horizontal splitting and vertical splitting. The TS801D sending card supports 1280 X 1024. After horizontal splitting, the single network port output supports 1280X512. After vertical splitting, the single network port output supports 640X1024. For a large screen with a large number of points and a small number of horizontal points, a single transmission card can be used to implement a single network port output load, and another network port backup can be loaded.

Third, the special features of the main products of Lingxing Rain

TS802 transmission card integrated sound transmission, you can transfer sound to the display without pulling the audio cable, dual 24-bit 64khz high-fidelity digital signal → analog signal and analog signal → digital signal conversion, so that your display image is perfect.

The RV801 receiving card has temperature detection and four-way fan monitoring output, which can intelligently control the four-way fan speed according to the upper temperature limit set by the user.

The EB701 is designed for a multi-display or large display. The card has two input ports and eight output ports. It supports 1 minute 8 or 2 2 points 4. The function is automatically switched. When used as 1 minute 8 Multi-card cascading is supported during use, and up to 8 cards can be cascaded to 1 point 64.

Fourth, long-distance engineering solutions

1. For each additional trunk card CN701, the distance between the sending card and the receiving card is increased by 100 meters.

2, multi-mode to MC701, transmission distance of 500 meters.

3, single mode to SC701, transmission distance of 10 kilometers - 20 kilometers.