How to use the water purifier correctly? Water purifier use attention to seven major issues

First, the initial use:

1. Turn on the tap and open the ball valve for the tap water inlet. Let the water flow through the purifier for 15 minutes until the water runs clear and there's no foam. It’s recommended to switch the faucet on and off periodically (turn off for 3 seconds, then on for 10 seconds), which creates a pulsating effect that helps clean the system more effectively.

2. Close the wastewater valve and open the purified water tap. After about 5 minutes, the system will be ready for normal use.

Second, daily usage:

1. Regular flushing is essential. Every time you take water from the tap, it also helps flush out the purifier. It's a good practice to run the purified water tap for a few seconds after each use to remove any trapped impurities and maintain the water flow rate, which can help extend the life of your purifier.

2. If the water output becomes low even after regular use, consider performing a backwash to restore the purifier’s efficiency.

Third, proper maintenance during use:

1. After each use, make sure the ultrafiltration membrane stays wet. If it dries out, it can cause a significant drop in water production that may not be recoverable.

2. If the tap water is turned off, first open the wastewater valve to drain any sediment or rust from the pipes before using the purified water again.

3. Avoid leaving the purifier unused for more than three days. When you resume use, flush the system for 2–5 minutes to ensure all stagnant water is removed.

4. Regular flushing during use can significantly increase the lifespan of your water purifier.

5. The water quality of your purifier is directly related to its total water output. If the water quality is good, the system can produce more water. However, as the filters wear down, the total output decreases, and the filter life shortens accordingly.

6. Even if the water output gradually decreases over time, the water quality should still meet safety standards. You can continue using it with confidence.

7. If the purifier malfunctions, immediately turn off the tap water supply and do not attempt to disassemble it unless you're a professional technician.

These seven key points, along with some small but important details, cover the essentials of using a water purifier properly. Following these tips not only helps reduce the chances of malfunction but also ensures the long-term performance and reliability of your water purifier. Paying attention to these practices can make a big difference in how well your device functions over time.