How to use the washing machine to save money 10 strokes to let you become a person

With the concept of low-carbon becoming more and more popular, more and more home appliances are being promoted in home appliance stores. However, the price of some energy-saving inverter appliances is too expensive. More than 3,000 air conditioners and more than 4,000 yuan washing machines are used. Not all consumers can accept it. In fact, as long as you pay attention to some details in the daily use process, ordinary household appliances can also be "low carbon." Today, the author will tell you how to use the washing machine to achieve low carbon. Let’s take a look.

(1) Wash first after soaking. Before washing, soak the clothes in a fluid soap or detergent solution for 10-14 minutes, let the detergent and the dirt on the clothes work, and then wash. In this way, not only can the laundry be washed more cleanly, but also the running time of the washing machine can be shortened by about half, and the power consumption is reduced by half.

(2) Separation and color washing, first shallow and deep. Different colors of clothes are washed separately, not only are washed clean, but also washed quickly, which can be shortened by 1/3 time compared with mixing. For some clothes that are not very dirty, put less detergent and reduce the number of rinses.

(3) Thin and thick first. Generally, the chemical fiber and silk fabrics with thin texture can be washed in four or five minutes, while the thick cotton and wool fabrics can be washed in ten minutes. Washing thick and thin separately can effectively shorten the running time of the washing machine than mixing and washing.

(4) Centralized washing. Concentrated washing is a very cost effective method of washing. That is, a bucket of detergent is washed several times in a row, and the washing powder can be appropriately added. After washing, the laundry is rinsed one by one. This saves electricity and water, saves washing powder and laundry time.

(5) Rated capacity. If the amount of washing is too small, the electric energy is consumed in vain. Conversely, washing too much at a time not only increases the washing time, but also causes the motor to be overloaded, which increases the power consumption and easily damages the motor.

(6) The water consumption is moderate and should not be too much or too little. Too much water will increase the water pressure of the wave plate, increase the burden on the motor, and increase the power consumption. If the water volume is too small, it will affect the ups and downs of the clothes during washing, increase the washing time, and increase the power consumption.

(7) Correctly grasp the washing time and avoid invalid movements. The degree of cleansing of the clothes is mainly related to the degree of dirt of the clothes, the type and concentration of the detergent, and is not proportional to the washing time. Exceeding the specified washing time, the washing degree will not be greatly improved, and the electric energy is consumed in vain.

(8) Adjust the belt of the washing machine. The belt slips and loosens, the current does not decrease, and the washing effect is poor; adjusting the belt of the washing machine can restore the original efficiency without consuming more power.

(9) The procedure is reasonable. After washing your clothes, it is best to dry the clothes and squeeze out the dirty water. This way, when you rinse, you can shorten the time and save water and electricity.

(10) Using a weak wash program to save more electricity

In the same long washing time, when the weak working, the motor starts more times, that is to say, the use of the strong gear actually saves electricity compared to the weak gear, and can extend the life of the washing machine.

According to the rotation speed of 1680 rpm (only for turbine type) dehydration for 1 minute, the dehydration rate can reach 55%. Generally dehydration does not exceed 3 minutes. It is of little significance to extend the dehydration time.