Wedge is the specific way to seal the bulb base. It is applied on many different types of bulb, such as T5, T6.5, T10, T13, T15 and T20. T5 bulb is usually be used as dashboard. T10 bulb are usually be used as interior lights, side indicators, front parking lights, 3rd stop light, glove compartment lights and license plate lights. T15 are usually be used as 3rd stop light, stop lights, rear Fog Light and reversing light. T20 are usually be used as front indicators, front parking lights, 3rd stop light, rear indicators, reversing light and stop lights. To get more detailed information, please contact with our sales representatives. We will reply with you as soon as possible.
Auto Wedge Base Lamp Auto Wedge Base Lamp,Car Interior Light,Car Width Light,Concave LED Light Heshan Jianhao Lighting Industrial Co., Ltd. , https://www.sunclubtw.com
The pace of progress in the times is always accompanied by the advancement of science and technology. The rapid development of science and technology has led the rapid development of products, technologies, and enterprises in various industries. Even the intelligent infrared human body induction lamps in the lighting industry have also introduced new and subverted traditions. LED body sensor lights are among the most representative products.
When LED lamps are used as light source design, all kinds of LED lamps are becoming more and more mature. LEDs are also used as light sources to integrate infrared sensing devices and LED lights. The LED body sensor lamps developed and produced have unique appearance and intelligent sensing characteristics. Traditional discrete infrared sensor lights compete for the smart sensor market.
The infrared human body induction lamp utilizes the hot infrared light emitted by the human body, and detects the electric signal generated by the heat sensing element, thereby controlling the opening and closing of the lamp through the sensing device, and has the characteristics that the person lights up and the person goes out of the lamp, which is very energy-saving, Save trouble and intelligence.
The traditional infrared human body induction lamp is composed of an inductive switch panel and a light source, and the two are separated. The sensor switch panel is mounted on the wall, similar to the socket. The load source is mostly incandescent. The installation position must be planned before installing the line. The two cannot be too close or too far apart. For the position inside the downlight or the small room, the flexibility is relatively poor. In the process of use, the incandescent lamp is a relatively power-consuming lamp. Although it has a human body sensing device, it can be used to light up people and walk the lights. It also saves electricity, but incandescent lamps are prone to burn out during frequent opening and closing. The cost of manual maintenance is high and should be replaced frequently.
LED human body induction lamp is a new type of intelligent lamp designed and produced by LED lamp bead as the light source. It is the most energy-saving, intelligent and convenient infrared sensor lamp so far. The LED lamp is a solid-state light source, low-voltage operation, long life and high luminous efficiency. The LED human body induction lamp combines the light source with the infrared sensing device, and the ordinary lamp holder can be used to screw the lamp on the lamp socket interface. use. In terms of brightness, the gold leaf energy saving model is GL-B48HK, the power of only 3.6W LED human body induction lamp brightness can be equivalent to 25W incandescent lamp, the life can reach 3-5 million hours, the ordinary E27 spiral interface, 220V AC power supply, suitable for most civilian lamp holders. For the position where the human body induction lamp is not planned to be installed in advance, it is very suitable and convenient to install the human body induction lamp. If it is for energy saving considerations, it is very convenient to modify the Changming lamp of the corresponding position.
LED human body induction lamps are also developed and produced by many manufacturers. In the author's research, most of them can only be used as reminder signs, nightlights, toys and gifts. LED light sources are also below 20 lights, some only A small number of a few, the brightness is far from the lighting requirements, if you want to install in stairwells, balconies, warehouses, etc., to undertake the basic lighting tasks is not competent.
In summary, LED human body induction lamps have several obvious advantages compared with traditional human body induction lamps. First, the light source is integrated with the sensing device. Second, the super power-saving, the light source power is only one-sixth of the incandescent lamp, but the brightness is equivalent to the incandescent lamp. Third, long life, up to 30,000 to 50,000 hours, eliminating the labor costs of many replacement and maintenance. Fourth, the installation is flexible, only a common lamp holder, 220V voltage access, easy to install. Fifth, the use of a wide range of positions, can undertake the basic lighting tasks, used in stairwells, balconies, warehouses, underground parking garages.
Because the LED human body induction lamp has many obvious advantages, it is the first choice to replace the traditional infrared induction lamp or the newly installed infrared intelligent lamp. Chongqing Lvqing Technology Co., Ltd. is responsible for research and development, production and sales of LED human body induction lamps, and will provide customers with comprehensive technical and service support.