Address function usually parameter 5297: Opening time 2 seconds 002A 5299: Multi-site call-out response time 3 seconds 003F 529A: Arrival and car call response time 5 seconds 0068 529B: SME trip time 15 seconds 0139 The following is the selection phase of some functions. When the parameter is 0001, the function is used. When the parameter is 0000, the function is not available. 541E: Load compensation 5803: Anti-riot 5804: Lighting and fans are automatically turned off 5805: Locking ladder PAK 5806: Automatic leveling 5808: Fire 5809: Back to base station 5812: Full staff 5814: 2CaY 5815: Parallel (0001 is the host 0000 is the slave) 5AC3: 04 (emergency) 5AC7: 08 (maintenance) 7.62MM Power+ Signal Power Connector
power connector is used in power module system. It can select the matching power + signal connector according to the need. The feature is that the number of power and signal contacts and the matching sequence can be selected arbitrarily while keeping the connector size and contact core number unchanged.
Plug (male) / socket (female) can be installed at 90 or 180 degrees. It supports mixed or independent combination of signal and power. The quantity range of power and signal is (2-16) pin and (12-128) pin respectively
7.62MM Power+ Signal Power Connector ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com
5298: Car call out response time 2 seconds 002A
Product features
High temperature resistant, glass fiber reinforced and flame retardant polyester is used as insulation material
Copper gold composite conductor with high conductivity is used, and the contact area of the conductor is plated with gold
It adopts shrapnel contact, which has the characteristics of integration, small volume, large current carrying capacity, soft plug-in, blind plug-in, self guidance and high dynamic contact reliability. This series of products can be interchanged with FCI's powerblade series and Tyco's multi-beam series
There are three sizes of center distance of power contact: 5.08mm, 6.35mm and 7.62mm
The length of power hole / signal pin can be selected in two sizes. The power rated current is 45A and the signal rated current is 2.5A