Skyworth cool open TV Internet settings tutorial [detailed Raiders]

Sofa butler tips coup Cool as a sub-brand of Skyworth, also has its own good consumer groups. However, many people found out after buying a home that they would not set up the Internet. Then, we must use today's Xiaowei teach you Skyworth cool open TV Internet tutorials, and quickly collect it.



method one:

1. The wireless USBshale, which is compatible with the Internet CoolTV, is plugged into the USB interface of the Internet CoolTV, ensuring the connectivity of the Wireless USBshale and the Internet CoolTV.

2. Then go to "Cool Settings" -> "Network Settings" -> "Wireless Network"

3. Determine the focus of the UI in the Find Network Options and press the OK button to search for all wireless networks in the wireless USB shale reception area of ​​the CoolTV.

4, the Internet CoolTV will search the wireless network name listed in the "find network" option on the right side of the list box, the user selects the appropriate wireless network name, the focus will be determined in the password option (if the user chooses The wireless network is not encrypted, and the measurement operation can be ignored. Input is based on the password provided by the selected wireless network.

Obtaining the IP Address Automatically: After performing the above operation, if the wireless router provides the mode of automatically obtaining the IP address, the focus is determined in the automatic acquisition of IP options, and the “OK” key is used to obtain the IP address, when the UI interface is right When the obtained IP address is displayed in the side status bar, it means that CoolTV has already successfully obtained the IP address provided by the wireless router and can access the Internet.

Manually obtain the IP address: If the wireless router provides the mode of manually obtaining the IP address, the operation of the web-cooling TV is: to determine the UI's operation focus in the "manually set IP" option option, and in the "manually set IP" In the secondary menu, enter the IP address, subnet mask, and default gateway information based on the information provided by the router. After the input is completed, press the "OK" button. After the IP address is displayed in the right status bar of the UI, you can access the Internet.


Method Two:

1. Turn on the TV and connect the wireless card to the TV USB port.

2. Select Cool Open Settings → Network Settings → Wireless Network

1) Auto search → Select your own wireless network user name to connect

2) Connect manually → enter the wireless network username and password to connect

3) Automatically obtain IP → select, automatically search for IP, and connect to the network d. Manually set IP → enter IP information, connect

3. After the connection is normal, the connection information (IP address, DNS address, MAC address, etc.) is displayed at the top right of the screen.

common problem:

1. After inserting the network card, the TV did not find the network card.

Solution:

1) Plug in the card again to make sure it is plugged in.

2) Replace the USB interface, ie plug the network card into another interface.

3) If it is still not found, there may be a problem with the USB interface. Plug the network card into the computer to test if there is a problem with the network card.

2, found a wireless signal, but not connected.

Problem analysis:

It may be a problem with a router or AP (wireless signalling device) or an encryption problem.

Solution:

1) Disconnect the router.

2) Reset the router and reset it.

3) Cancel encryption or replace other encryption methods.

Piezo Transducer

Piezo Transducer,Piezo Audio Transducer,Piezoceramic Transducer,Piezo Pressure Transducer

NINGBO SANCO ELECTRONICS CO., LTD. , https://www.sancobuzzer.com