12 Port Rack Mounted ODF Fiber Patch Panel

Model NO.: SLODF-R12
Housing: Stainless Steel
Trademark: STAR LINK
Transport Package: 1PC/Box
Specification: stainless steel
Origin: China
HS Code: 85177090
Model NO.: SLODF-R12
Housing: Stainless Steel
Trademark: STAR LINK
Transport Package: 1PC/Box
Specification: stainless steel
Origin: China
HS Code: 85177090
ODF is mainly used for cable inlet, grounding and fixing and the splicing between the terminal end and pigtail. 

 
1. Features:
- Cold-roll steel, electrostatic painting
- ABS plastic tray inside, 12-24cores per tray
- Different adapter plate available: FC, SC, LC, ST
- Suitable for 19 inches standard optic distribution cabinets
- With front cover; 4 fiber cable entry ports at rear side
- Cable entry ports suitable for single fiber, bundle & ribbon fiber cables
- Reasonable design ensures the cables are in good order
- Rack mouted fixed type, indoor using;
- White, black, grey ?- color painting optional
- 12, 24, 48, 96 ports- capacity customised
 
2. Application:
Mainly used for cable inlet and fixing; fiber splicing and protecting; pigtail storage; patch cord storage, connection and use management between wiring closets and equipments.
Applicable to Telecommunications, Fiber to the home (FTTH), LAN / WAN, CATV ect. System projects.
 
3. Parameters:
Atmospheric pressure: 70Kpa-106Kpa
Durability: >1000 times
Standard working wavelength: 850nm, 1310nm, 1550nm
 
4. Specification:

 

Model
Capacity
Height
Dimension
Remark
SLODF-RF12
12 cores
1U
420x300x44.5 mm
1pc splice tray
SLODF-RF24
24 cores
1U
420x300x44.5 mm
2pcs splice trays
ODF is mainly used for cable inlet, grounding and fixing and the splicing between the terminal end and pigtail. 

 
1. Features:
- Cold-roll steel, electrostatic painting
- ABS plastic tray inside, 12-24cores per tray
- Different adapter plate available: FC, SC, LC, ST
- Suitable for 19 inches standard optic distribution cabinets
- With front cover; 4 fiber cable entry ports at rear side
- Cable entry ports suitable for single fiber, bundle & ribbon fiber cables
- Reasonable design ensures the cables are in good order
- Rack mouted fixed type, indoor using;
- White, black, grey ?- color painting optional
- 12, 24, 48, 96 ports- capacity customised
 
2. Application:
Mainly used for cable inlet and fixing; fiber splicing and protecting; pigtail storage; patch cord storage, connection and use management between wiring closets and equipments.
Applicable to Telecommunications, Fiber to the home (FTTH), LAN / WAN, CATV ect. System projects.
 
3. Parameters:
Atmospheric pressure: 70Kpa-106Kpa
Durability: >1000 times
Standard working wavelength: 850nm, 1310nm, 1550nm
 
4. Specification:

 

Model
Capacity
Height
Dimension
Remark
SLODF-RF12
12 cores
1U
420x300x44.5 mm
1pc splice tray
SLODF-RF24
24 cores
1U
420x300x44.5 mm
2pcs splice trays

High Efficiency Rectifier

●High-efficiency, energy-saving design, full display of green concept from inside to outside
The system adopts a high-efficiency rectifier, the peak efficiency of the rectifier is greater than 96.2%, and the power consumption of the rectifier sleep is as low as 4W or less.
●The rectifier module is small in size and high in power density, improving the utilization of cabinet space
●Fully digital design, more stable performance
The rectifier adopts DSP+MCU dual digital circuit control mode, the system adopts CAN+RS485 dual bus control, the system power supply reliability is higher, and the transmission rate is faster.

High efficiency rectifier

Changzhou Changyuan Electronic Co., Ltd. , https://www.changyuanelectronic.com

May 28, 2025